Listed below are a few examples a person can look at when considering an installation of a filter at their property. The team at Sydney’s Plumbing Specialists have access to an extensive range of filters and taps required for any installation needed
Is your drinking water
safe for your family?
This is a very important question a Sydney resident should always ask themselves to not risk anyone’s health
The danger & problem
Previously in Sydney, traces of lead, copper, chlorine and other nasty toxins have been found in our water lines meaning it could be harming us every time we turn a tap on and a family member uses water.
Thankfully, there are filters we can install on our services which will mean our drinking and bathing water will be safe from the issues we are facing with our water supply.
We have 3 options we are offering our clients that will help eliminate all of the issues we are currently faced with
Inline Water Filter
Inline water filter used only for drinking underneath a sink.
No taps need to be replaced or fittings changed
This simply gets installed underneath your kitchen sink from the cold-water supply, straight into the filter unit then straight into the cold-water supply of your kitchen sink tap. No new taps need to be purchased; we simply use your existing tap you have currently installed
This now means all sediment, rust, chlorine, and debris will be removed from your potentially harmful water supply
Total cost of this option is
$450 + GST*
(usually valued at $550 + GST)
Filters need to be replaced every 12 months to ensure filtration process is working efficiently. Contact SPS Plumbers for more information or enquiries
Mains Water Backwash Filter
The second option we have is a manual water filter we install
off your mains water supply. This protects the ENTIRE house
We simply re-configure the pipework off your mains water supply, install the below filter which helps protect you and your and ensures your drinking and bathing supply is safe.
Every 3-4 months you simply can either connect a small hose to the bottom of the filter and flush the filter out essentially removing all build up and debris found in the water supply which can be harming you and your family
Total cost including all labour & parts
$795 + GST*
(usually valued at $895 + GST)
Product comes with a 7 year warranty. No filters need to be charged or replaced with this style of filter
How it all works
Water enters the filter and flows through the filter element
The foreign particles are then retained in the filter element
The foreign particles are washed out of the filter during the back-washing process. This involves simply turning the knob on the Avanti or setting the timer on the Infinity and Multipur units. The frequency is dependent on the water quality. If you are uncertain, backwash once per week.
Only a small volume of water is required for backwashing with minimal impact on water pressure to the house or property
Fresh, clean water flows into the home, building or other structure
Standard Water Filter
Simple standard installation that consists of a connection to a cold water point & area
Water filters installed in a home is a great way of ensuring the drinking water at your property is safe for all your family members.
The installation is a simple one, in that all that is required is a connection to cold water point and area either on the sink that the filter can be mounted too. If the sink is an undermount sink, a provision should be left in the stone for the tap to be mounted too. Filters on the tap need to be replaced every 12 months to help ensure the water always remains safe
For an extensive range, please phone one of our friendly staff who can assist you with your plumbing and water filter needs on (02) 9002 7332
*If installation is not standard and require additional work, parts, labour or materials. additional charges will apply.